Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 56

Page: 56 / 74

Operation Manual

www.xmfg.com

Operation

Fig 64. Raise Boom Until Pivot Pins (A) Are Fully Seated in Attachment

Hooks (B)

Raise the boom until pivot pins (A) have seated fully in at-

tachment hooks (B).

Tilt the attachment up slightly. The quick attach adapter

should be tight against the rear of the attachment. Align the

holes between the quick attach adapter and attachment.

Insert pin completely through the attachment and quick

attach adapter.

Fig 65. Insert Quick Attach Pin Through Attachment and Quick Attach

Adapter

Fig 66. Quick Attach Pin Keeper

Insert quick attach pin keeper.

Hydraulic attachments have a maximum

hydraulic pressure rating. Failure to make

sure the attachment is equipped with a

pressure reducing valve, or is rated to be

equal or greater than 3,200 psi (220.6 bar),

which is the maximum pressure of the forklift auxiliary

hydraulic system at the quick-disconnect couplers, could

result in death or serious injury.

Warning

Connect the quick attach couplers (this only applies to at-

tachments with a quick attach hydraulic system).

Fig 67. Quick Attach Couplers

Summary of Contents for XR619











































































Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands

Xtreme Manufacturing XR619, Operation And Safety Manual

Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands