Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 38

Page: 38 / 74

Operation Manual

www.xmfg.com

Operator Cab

HIDDEN UTILITIES
The HIDDEN UTILITIES screen is accessed from the MAIN

MENU by pressing the lower left menu select button and then

on the next screen pressing the middle upper select button

twice and then the middle lower button twice.

Pressing the

MENU button will return to the UTILITIES mode.
The HIDDEN UTILITIES menu has the following sub-menus:
•

System Setting

•

Service Reminders

•

PG Controls (button not shown in Hidden Utilities screen)

•

Back-Up Camera Setup

•

Clear Faults

NOTE:

This menu is not intended for regular end-users.

Fig 33. User Settings

Fig 35. Transmission Calibration - Machine Conditions Check

Fig 36. Clutch Calibration

It calibrates the first clutch, and upon successful calibration it

moves to the second and so forth. The Telehandler must be

OFF after calibration is complete.

Fig 37. First Clutch Calibration Successful

ACTIVE FAULTS
This option allows for viewing all active engine faults. Scroll

using the Up and Down arrows.

The top left button restore the default settings. Each Restore

Defaults needs to be confirmed or canceled on the next

screen. Pressing the MENU button will return to the previous

menu.

Fig 34. User Settings Pop-Up Warning

TRANSMISSION CALIBRATION - EZcal
Used to re-calibrate the transmission clutches. After each

transmission oil change, the transmission needs to be re-

calibrated to accommodate for clutch wear.

When the "EZcal" button is pressed, the TCU (Transmission

Control Unit) enters transmission calibration mode and it

checks first for all the machine conditions necessary for a

successful transmission calibration. It displays a green check

symbol to the right of the condition if it is met.
When all of the machine conditions for calibration are met,

the TCU enters clutch calibration mode.

Summary of Contents for XR619











































































Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands

Xtreme Manufacturing XR619, Operation And Safety Manual

Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands