Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 2

Page: 2 / 74

PN 24978-000

REV A

January 2019

AUTHOR:

OVY LUNGU

Xtreme Manufacturing, LLC

(http://www.xmfg.com/)

is headquartered in Las Vegas, Nevada, and has fabrication facilities in Selma, California.

In October 2013, Xtreme Manufacturing became the majority shareholder in Snorkel International Holdings LLC, a global aerial work platform

manufacturer, which has manufacturing facilities in the US, UK & New Zealand, as well as a global sales distribution network.

Snorkel Europe Limited, Snorkel USA LLC and Snorkel New Zealand Limited are wholly owned by Snorkel International Holdings LLC, whose mem-

bers are Xtreme Manufacturing, LLC (majority shareholder) and The Tanfield Group Plc. Find out more about Snorkel at www.snorkellifts.com.

Xtreme Manufacturing

8550 Eastgate Road

Henderson, NV 89015, USA

Contact Us:

T: 1.800.497.1704

T: 1.702.636.2969

F: 1.702.636.4943

www.xmfg.com

Pre-delivery Inspection Report must be completed upon placing unit in service.

Please use QR link or visit

www.xmfg.com/warranty/pre-delivery-inspection-report

to register online.

Summary of Contents for XR619











































































Search results

Summary of Contents for XR619

Reviews:

Xtreme Manufacturing XR619, Operation And Safety Manual, Page: 2 / 74

Search results

Summary of Contents for XR619

Reviews: