Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 39

Page: 39 / 74

Operation Manual

www.xmfg.com

Operator Cab

Fig 38. Hidden Utilities

•

System Settings

This sub-menu is used by developers and is accessed from

the HIDDEN UTILITIES menu by pressing the corresponding

select button. Use the Up or Down select buttons to navigate

through this menu. The top left select button restore the man-

ufacturer default settings.

Fig 39. System Settings

•

Service Reminders Settings

This menu is in the HIDDEN UTILITIES menu and it is accessed

by pressing the service reminders select button.

Fig 40. Edit Service Reminders

•

Back-Up Camera Setup

This sub-menu is used by developers or trained personnel

only to setup an optional back-up camera.
•

Clear faults

As the title implies, this sub-menu is used to clear any engine

or system faults and it is used by developers or trained per-

sonnel only.

This area is for editing or resetting the service reminders once

a service has been completed and is different than the SER-

VICE REMINDERS in the MAIN MENU where users can check

on the status of the service reminders to see how many hours

until the next service is required.
Scroll up or down through this screen using « or » buttons.

The button returns to the previous menu.
Press the "Edit" button to access the Service Remainders edit-

ing screen. Use the reset button to get back to factory settings.

Fig 42. PG Control Screen

Fig 41. Edit Service Reminders

•

PG Control

This sub-menu is used by developers or trained personnel

only and is beyond the scope of this Operator Manual.

Summary of Contents for XR619











































































Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands

Xtreme Manufacturing XR619, Operation And Safety Manual

Search results

Summary of Contents for XR619

Reviews:

Related manuals for XR619

Brands by name

Popular brands