Xtreme Manufacturing XR619 Operation And Safety Manual Download Page 36 | Manualshive

Page: 36 / 74

background image

Operation Manual

36

www.xmfg.com

Operator Cab

K. FUEL GAUGE
Indicates the approximate quantity of fuel in the tank. The

total capacity of the fuel tank is 17 gallons.

L. ENGINE TEMP GAUGE
Indicates the temperature of the coolant in the engine cooling

system. After starting the forklift, allow time for the Engine

Temp Gauge to begin moving before operating the forklift.

After the engine has sufficiently been warmed up, normal en-

gine coolant temperature should read between 1800 to 2000 F.
M. VOLTAGE GAUGE
Indicates the amount of charge (in Volts). Normal system

voltage is between 12.5 and 14 Volts. If the voltage gauge

shows abnormal readings, stop the forklift, follow proper shut

down procedures, tag forklift with “Do Not Operate” tags, and

have a qualified mechanic service or repair the forklift BEFORE

placing it into service again.
N. DIGITAL CLOCK / MESSAGE DISPLAY
Displays warnings or status / information messages. If there is

no message or warning, it displays the digital clock.

O. TRANSMISSION SHIFT INDICATOR
The transmission has two forward "F" and two reverse "R"

modes; namely, it can operate in Automatic mode or Low

Range mode. When the transmission is in Neutral, the Trans-

mission Shift Indicator displays "N".
The subscript "A" or "L" indicates the Auto or Low transmission

range. The reach forklift starts up with the transmission in AU-

TOMATIC mode. By pressing the Auto/Low switch on the dash,

the machine switches from Automatic to Low Range, indicat-

ed by the "L" in the subscript.
Pressing the Auto/Low button again switches back to Auto-

matic range, indicated by subscript "A".
The "Low” mode is used for climbing steep grades, or when

ever slow speed is desired. The “Auto” mode adapts to drive

conditions and allows for higher speed travel.
P. ANALOG TACHOMETER DISPLAY
Indicates engine RPM on an analog/digital gauge.
Q. DIGITAL TACHOMETER
The engine RPM is also displayed as a digital readout.
R. HOUR METER
Indicates and records engine operating hours. Use the hour

meter to establish a forklift maintenance schedule.

Display Features

The display allows the operator to view vital engine

information and other critical functions, including gauge

display, engine diagnostics to monitor engine condition and

performance, fault codes, and warning lights.

POWER UP
When the ignition is turned on, the display powers up and

defaults to GAUGE DISPLAY mode. The display should remain

in this mode for normal operation.

MAIN MENU
Pressing the MENU button will bring up the MAIN MENU.

Pressing the MENU button again brings up the SERVICE

REMINDER screen.

Fig 25. Power Up Screen

Enter Button

Menu Button

Fig 26. Main Menu

S. MENU BUTTON INDICATOR
Use the soft button to the left of this indicator to access the

Main Menu screen.

Select Buttons

Select Buttons

«
...
34
35
36
37
38
...
»

Summary of Contents for XR619











































































Reviews:

No comments

Related manuals for XR619

Brand: RAMROD Pages: 33

Brand: Genie Pages: 64

Brand: Allied Pages: 42

Brand: Allied Pages: 48

Brand: Scag Power Equipment Pages: 29

Brand: Norfield Pages: 67

Caterpillar HY 60

Brand: Niko Pages: 35

Brand: Hitachi Pages: 278

Brand: Toro Pages: 8

Brand: Toro Pages: 16

BOXER 427 Operators

Brand: Compact Power Pages: 86

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands