Operation Manual
40
www.xmfg.com
Operator Cab
Boom Control Handle Functions
Function
Purpose
Aux Button 1
Control auxiliary direction 1
Aux Button 2
Control auxiliary direction 2
Enable Trigger
Trigger must be enabled for other
functions of the control handle to op-
erate
Tilt Thumb-stick
Control carriage tilt (up/down)
Fig 43. Multifunction Joystick Controller
Fig 44. Boom Control
Joystick Functions (1)
A
B
C
D
E
F
G
H
Multifunction Joystick Controller (Joystick)
The joystick is used to raise, lower, extend, retract the boom,
tilt the carriage (or attachment).
NOTE: The joystick is a variable speed control. Function speed
is proportional to handle movement. The more the joystick is
moved in the appropriate direction, the faster the correspond-
ing function will occur.
NOTE: Increasing engine speed can increase boom lift, ex-
tend, and carriage tilt speeds.
NOTE: Two (2) boom functions can be performed at the same
time by moving the joystick into the corner between (2) indi-
vidual functions (Positions B, D, F or H, Fig. 44).
Fig 45. Boom Control Joystick Functions (2)
Enable Trigger
Tilt Thumbstick
Aux Button 1
Aux Button 2
Enable LED
