
Page 36
MX Series — MX24 Operating Instructions
ta
x
Connect To The Unit
The loader will detect multiple units, but as there is no way to easily cross-reference IP
addresses with physical devices, we recommend only connecting one MX Series unit to the
network at a time when performing firmware updates, or power down any other devices
temporarily.
Start the loader application:
After a few seconds, the unit should be located and its status and type should be displayed,
along with the current firmware and some other information.
Start the Update
Just before you press the “Load” button — please close any other applications running on the
PC — interruptions in the process could render your unit inoperable. Do not disconnect the
cable, turn off the power or attempt to close the loader app once loading has begun!
Now that you have been warned (!) — press the “Load” button, and the unit will mute and begin
to load the new firmware.
Upon completion, the app will close, and your unit will restart — that’s it!