
Page 16
MX Series — MX24 Operating Instructions
ta
x
8: Stereo Line Input: This unbalanced stereo input is mirrored on the rear panel with a pair
of fully balanced XLR inputs. Use to connect a laptop or mobile sourced sound source for
background music feeds, or even another stereo console.
9: Stereo Line Level: The gain range has been designed to act like a “fader” so this can be
used for accurate control of background music level. The minimum position is “OFF” and the
12 o’clock position is 0dB.
10: Stereo Line Send to Outs Selection: 1+2: Toggle whether the stereo input will be sent to
main outputs 1+2 when the ON button is enabled. 3+4 / Mono to 3+4: These two buttons are
mutually exclusive and will send either a stereo feed to main outputs 3+4, or a mono sum of
the stereo signal to 3+4.
11: Stereo Line Filter: Enable a high pass filter to prevent excessive LF from background
music sources. This effect can be previewed via the listen function. The filter’s response is
shown in Appendix I on page 34.
12: Stereo Line Listen: Press to hear a mono mix of the stereo line feed through the
headphones. Set the gain accurately by using the meter in Line Monitor section. Note that
this will interrupt the current line signal being monitored. The button will flash to show this
is active.
13: Stereo Line ON: Toggle the Stereo Line signal to the outputs as selected by buttons 3.
14: Locked/Safe LED: If the padlock button is active, the corresponding locked/safe LEDs
show which sections cannot be adjusted. Only the LISTEN buttons remain operative when the
panel is locked.