
MX Series — MX24 Operating Instructions
Page 23
ta
x
Inside Your MX24: Configurations and Routing
Overview of Audio Routing
The MX24 offers two sets of four inputs, each of which can be either analogue or digital audio.
ANALOGUE
AES
NETWORK AUDIO
L-R-FF-SUB
L/R
FF/SUB
LEFT
RIGHT F.FILL
SUB
MX24-D
MX24-A
These are designated as sets A and B, and each set can switch automatically between either
the analogue or digital inputs, depending on the settings of the front panel source selection.
PRIMARY
INPUT SOURCE
BACKUP
ANALOG
DANTE
The “output” of each of the sets is controlled by the set of two console switching selectors on
the front panel which will then route these onto the main four-channel output bus.
The output bus is available simultaneously as four analogue outputs, a pair of two channel
AES outputs (MX24-A), and four transmitter channels on the Dante network (MX24-D).
ANALOGUE
AES DIGITAL
NETWORK AUDIO
1-2-3-4
1-2
3-4
-1-
-2-
-3-
-4-
MX24-D
MX24-A