MX Series — MX24 Operating Instructions
Page 27
ta
x
Working without Redundancy
If alternate signal formats are not available for your sources, the unit can be run entirely
without redundancy or of course it can be mixed - one set with, one without as explained in
the previous example on page 26.
If redundancy is not being used, the other inputs can be used to operate the unit in a different
way, and to simply switch between more sets of four channels, allowing connection of up to
four quad channel sources (assuming 2 of each in analogue/digital formats).
Backup sources are disabled (via the front panel — Backup = Off) and the Primary source
switching is used to cycle between the two signal types to select one of two consoles.