Xoro HSD 8430, User Manual

Page: 90 / 243

40
Engl
ish
TROUBLESHOOTING
Check the following guide for the possible cause of a problem before contacting service.
Technical Support of Xoro/MAS:
Tel.: 040/77 11 09 17
Internet: www.xoro.de/support.htm
Sympton Cause Correction
No power The power plug is discon-
nected Connect the power plug into the
wall outlet
No picture
•
The TV is not set into re-
ceive DVD signal output
•
The video cable is not con-
nected securely
•
The DVD video mode is not
matched with the TV
•
Select the appropriate video
input on the TV so the picture
from the DVD player appears on
the TV screen
•
Connect the video cable into the
jacks securely
•
Refer to connecting to a TV
No sound
•
The audio cable is not con-
nected securely
•
The power of the equipment
with the audio cable is
turned off
•
The setting of output sound
type is not correct
•
Connect the audio cable into the
jacks
•
Turn on the equipment con-
nected with the audio cables
•
Set the audio settings correctly
The playback picture
has occasional
•
The disc is dirty
•
It is in fast forward or fast
reverse playback
•
Eject the disc and clean it
•
Sometimes a small amount of
picture distortion may appear.
This is not malfunction.
Brightness is unsta-
ble or noises are
produced on play-
back pictures
•
The copy protection effect
•
Connect the DVD player to the
TV directly
The DVD player does
not start playback
•
No disc inserted
•
An unplayback disc in in-
serted
•
The disc is placed upside
down
•
The disc is not placed within
the guide
•
A menu is on the screen
•
The parental lock function is
set
•
Insert a disc
•
Check the disc type and colour
system
•
Place the disc with the correctly
•
Place the disc on the disc tray
correctly inside the guide
•
Clean the disc
•
Press the SETUP button to turn
off the menu screen. Cancel the
parental lock function or change
the parental.
Buttons do not work Power supply fluctuations or
other abnormalities such as
static electricity may interupt
correct Turn the power on or off with the
POWER button or disconnect the
power plug and insert it into the
wall outlet again.