XNET Network Box Camera User’s Guide
29 of 47
5.7. Sensor & Capture Setup
This is the setup page for sensors and video capture conditions. Captured video can be sent to
user by FTP or E-mail upon configuration.
Figure 5-9. Sensor & Capture Setup
Field/Button
Sub Field
/Button
Description
Sensor Setup
Sensor 1
Select sensor type. There are two types of sensors which are
Normal Open
and
Normal Close.
Name
Input logical name for the sensor.
Video Capture
Condition
It sets the condition of video transmission via FTP or E-mail.
The XNET/XNET-Wireless supports 2 types of conditions which
are mutually independent.
Sensor
Select
Check to enable Sensor initiated capture.
Motion
Detection
Select
Check to enable motion detection initiated capture.
Captured
Video
Select a way of sending captured video. You can send
captured video through FTP or E-mail, or both.
