XNET Network Box Camera User’s Guide
16 of 47
5.1.3. Input User Name and Password
After fallowing the method which explained in Section 5.1.1. or 5.1.2, the login screen will open.
Input the User Name and Password in the login screen shown in Figure 5-2.
Figure 5-2. Login screen
The default setting for the User Name and Password are „
root
‟ and „
dw2001
‟, respectively. Click on
“OK” button to enter into the Basic Setup page of Administrative Mode. If you have changed the
username and password of the Administrator, you must log on with the changed username and
password.
If you forget the user name and password, the only way to reset it is by resetting the
unit to factory default through the reset button. It will make all the settings go back
to default. In this case, you have to setup the network parameters again. Please refer
to section 3.
After login to the administrative mode, change the user name and password for
security. Please refer to section 5.6. “
User Admin & Time Setup”
for detailed
information.
