XNET Network Box Camera User’s Guide
11 of 47
Page
Parameter
Setup value
Factory default value
Basic
Setup
Video Size
Set the resolution of the video
transmitted from XNET/XNET-
Wireless.
Make sure that you press Check
button to find out the number of
maximum possible simultaneous
users then set the number of
users smaller than or equal to
the number.
Max Upload Rate
Set this value smaller than the
upload speed of your network.
Frame Rate
The number of frames to be
transmitted per second.
Video Rate
Bandwidth assigned for video
transmitted from XNET/XNET-
Wireless.
User
Admin &
Time
Setup
Administrator
name &
password
For safety, you are recommended to
change these values from factory
default. For new connection, you
need to input changed values for
corresponding fields. Do not disclose
these values to others and
memorize these values.
Default value
Username :
root
Password :
dw2001
Current Time
Input correct time in this field.
Default value :
2001/1/1
⑤
Connect the input and output signals to XNET/XNET-Wireless
Connectors
Function
Signal description
Number
LINE-
In/MIC
Audio in
Connect microphone or output from audio
devices.
1
Line Out
Audio out for speaker
Audio from remote site is available from
this connector in bi-directional audio
mode. Connect speaker with amplifier.
1
Alarm In
Connecting Alarm
Sensor
IR sensor, Motion Sensor, Smoke
Detector…
1
Alarm Out
Connecting Alarm
annunciating device
Siren, Flashing Light, …
1
RS485
PT device control
Remote P/T/Z device connection having
RS485 interface.
1
100Base-T
Network connection
Connect XNET/XNET-Wireless to the
network, LAN, ADSL or Cable modem.
1
12VDC
Power connector
The input power source is 12VDC
1
