XNET Network Box Camera User’s Guide
9 of 47
Antenna Connector
:
Connector for connecting 3dBi antenna supplied with
XNET-Wireless
2.4. PC Requirements
AV streaming data received from XNET/XNET-Wireless can be decoded or stored in a PC running
XNET-NVR program which is a viewing & recording program for a PC. Minimum requirement of
the PC is described below:
Item
Minimum
Recommended
CPU
Pentium III 700
Pentium IV 1.2G above
Main Memory
128 MB
256MB above
Operating system
*
Windows 2,000 or later
Windows 2,000 or later
Web browser
Internet Explorer 5.0
Internet Explorer 5.0 above
Resolution
1,024*768
Higher than 1,024*768
Network
10 Base-T Ethernet
100 Base-T Ethernet
* Supported O/S: Windows 2000 Professional
Windows XP Professional / Windows XP Home Edition
2.5 Quick Installation Guide
Brief information for rapid installation is provided in this section. For more detailed information
you are recommended to refer to pertinent documentations provided with the product or refer
to our official website.
(http://www.cnbtec.com)
①
Connect XNET/XNET-Wireless to the LAN by using one of the following method
i.
If you have power adaptor with PoE, connect the network camera and PC as illustrated
in Figure 2.5. Both power and network connection is made with a single LAN cable. The
propriety PoE (Power over Ethernet) adds convenience in installing the network camera
by providing both power and LAN connection using single LAN cabling.
Figure 2-5. Connecting Network camera and PC using PoE Adaptor
LAN Hub
PC
PoE Adaptor
LAN
AC In
Cam
XNET
100BaseT
