88
www.xilinx.com
Ethernet 1000BASE-X PCS/PMA or SGMII v9.1
UG155 March 24, 2008
Chapter 7:
1000BASE-X with RocketIO Transceivers
R
Virtex-4 FX Devices
Figure 7-6
illustrates sharing clock resources across multiple instantiations of the core
when using MGTs. Note that the example design, when using the Virtex-4 family, can be
generated to connect either a single instance of the core, or connect a pair of core instances
to the transceiver pair present in an MGT tile.
Figure 7-6
shows two instantiations of the
block level, where each block contains a pair of cores, subsequently illustrating clock
sharing between four cores in total.
More cores can be added by continuing to instantiate extra block-level modules. Share
clocks only between the MGTs in a single column. For each column, use a single
brefclk_p
and
brefclk_n
differential clock pair and connect this to a
GT11CLK_MGT
primitive. The clock output from this primitive should be shared across all used RocketIO
tiles in the column. See the
Virtex-4 RocketIO Multi-Gigabit Transceiver User Guide
(UG076)
for more information.
To provide the 125 MHz clock for all core instances, select a
TXOUTCLK1
port from any
MGT. This can be routed onto global clock routing using a BUFG as illustrated, and shared
between all cores and MGTs in the column. Although not illustrated in
Figure 7-6
,
dclk
(the clock used for the calibration blocks and for the Dynamic Reconfiguration Port (DRP)
of the MGTs) can also be shared.
