manualshive.com logo in svg

Xilinx LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1, User Manual

The Xilinx LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1 provides high-speed communication capabilities for networking applications. A comprehensive User Manual is available for free download at manualshive.com, offering detailed instructions for optimal usage of this advanced IP core.

Share
Download
background image

www.xilinx.com

Ethernet 1000BASE-X PCS/PMA or SGMII v9.1

UG155 March 24, 2008

R

Virtex-5 RocketIO GTX Transceivers for SGMII or Dynamic Standards 

Switching Constraints . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  168

Ten-Bit Interface Constraints  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  168
Constraints When Implementing an External GMII . . . . . . . . . . . . . . . . . . . . . . . . . . .  172
Understanding Timing Reports for Setup/Hold Timing  . . . . . . . . . . . . . . . . . . . . . .  176

Chapter 13:  Interfacing to Other Cores

Integrating with the 1-Gigabit Ethernet MAC Core

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 179

Integration of the 1-Gigabit Ethernet MAC to 1000BASE-X PCS with TBI . . . . . . . .  179
Integration of the 1-Gigabit Ethernet MAC Using a RocketIO Transceiver  . . . . . . .  181
Integration of the 1-Gigabit Ethernet MAC to Provide SGMII 

(or Dynamic Switching) Functionality . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  185

Integrating with the Tri-Mode Ethernet MAC Core

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 185

Integration of the Tri-Mode Ethernet MAC to Provide SGMII 

(or Dynamic Switching) Functionality with TBI . . . . . . . . . . . . . . . . . . . . . . . . . . . .  185

Integration of the Tri-Mode Ethernet MAC to Provide SGMII 

(or Dynamic Switching) Functionality using RocketIO Transceivers . . . . . . . . . .  188

Chapter 14:  Special Design Considerations

Power Management

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

Startup Sequencing

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

Loopback

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197

Core with the TBI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 197
Core with RocketIO Transceiver  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  198

Chapter 15:  Implementing the Design

Pre-implementation Simulation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

Using the Simulation Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  201

Synthesis

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 201

XST - VHDL  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  201
XST - Verilog . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202

Implementation

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 202

Generating the Xilinx Netlist  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202
Mapping the Design  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202
Placing and Routing the Design  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  202
Static Timing Analysis . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  203
Generating a Bitstream  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  203

Post-Implementation Simulation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Generating a Simulation Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  203
Using the Model . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 203

Other Implementation Information

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 204

Appendix A:  Core Verification, Compliance, and Interoperability

Verification

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Simulation

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Hardware Verification

 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 205

Summary of Contents for LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1







































































































































































































































Reviews:

No comments

Related manuals for LogiCORE IP Ethernet 1000BASE-X PCS/PMA or SGMII v9.1

TAA Amanda User Manual preview
Amanda
Brand: TAA Pages: 28
Adobe ACROBAT 3D Manual preview
ACROBAT 3D
Brand: Adobe Pages: 822
ScanSoft OMNIPAGE 15 Manual preview
OMNIPAGE 15
Brand: ScanSoft Pages: 94
MACROMEDIA FLASH 8-USING FLASH VIDEO ENCODER Use Manual preview
FLASH 8-USING FLASH VIDEO ENCODER
Brand: MACROMEDIA Pages: 30
Alcatel VitalQIP Specifications preview
VitalQIP
Brand: Alcatel Pages: 4
RedMoon Music maxWerk User Manual preview
maxWerk
Brand: RedMoon Music Pages: 74
Ulead COOL 3D User Manual preview
COOL 3D
Brand: Ulead Pages: 100
Symantec Norton Antispam Personal Firewall and Systemwork - Norton Antispam User Manual preview
Norton Antispam Personal Firewall and Systemwork - Norton Antispam
Brand: Symantec Pages: 33
Symantec NORTON 360 5.0 User Manual preview
NORTON 360 5.0
Brand: Symantec Pages: 40
Symantec NORTON GHOST User Manual preview
NORTON GHOST
Brand: Symantec Pages: 80
Symantec OLE Automation Manual preview
OLE Automation
Brand: Symantec Pages: 91
Symantec ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0 Manual preview
ALTIRIS INVENTORY 7.0 SP2 - FOR NETWORK DEVICES V1.0
Brand: Symantec Pages: 148
Texas Instruments NoteFolio Software Manual preview
NoteFolio
Brand: Texas Instruments Pages: 37
KAPERSKY ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER 2000-2003 Administrator'S Manual preview
ANTI-VIRUS 5.5 - FOR MICROSOFT EXCHANGE SERVER 2000-2003
Brand: KAPERSKY Pages: 143
Bay Networks Remote Annex User Manual preview
Remote Annex
Brand: Bay Networks Pages: 90
Xerox DocuColor 2045 Color Management Manual preview
DocuColor 2045
Brand: Xerox Pages: 60
Ulead MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR... User Manual preview
MEDIASTUDIO PRO 8.0 - SMART COMPOSITOR...
Brand: Ulead Pages: 308
Tandem ENFORM 058057 Reference Manual preview
ENFORM 058057
Brand: Tandem Pages: 312

Brands by name

Popular brands

Load more brands