Xerox WorkCentre XK25c, User Manual

Page: 24 / 102

Getting Started 9
5
Attach a printer cable.
Q
USB cable (only for Windows 98 PCs): Plug one end into the USB
port on the back of the WorkCentre, and the other end into the USB
port on your PC.
Or
Q
Parallel cable (not supplied, use IEEE 1284 cable for bi-directional
communications): Plug one end of the parallel cable into the
matching parallel port on the back of the WorkCentre, and plug the
other end into the matching parallel port on your PC. Swing the two
wire clips on the sides of the WorkCentre parallel port inward until
they lock firmly inside the notches on the parallel cable connector.
Refer to your computer documentation for assistance with this
parallel cable procedure.
CAUTION: Use only one cable – USB or parallel cable. If your PC
does not have both a USB port and Windows 98, you must use a
parallel cable.
Wire clip Parallel port USB port
6
Plug one end of the AC power cord into the power socket on the back of
the machine. Plug the other end into a standard AC power outlet.
AC power cord socket
ª