Xerox WorkCentre XK25c, User Manual

Page: 38 / 102

Getting Started 23
General Installation
1
Make sure the WorkCentre is connected to your PC.
2
Power on the WorkCentre.
3
Turn on your PC and start Windows.
4
Insert the WorkCentre CD-ROM into your CD ROM drive.
Installation for Windows
®
3.1X continued…
5
From the File menu of the Windows Program Manager, select File>Run.
6
Type d:\Xinstall.exe (replace "d" with the letter designation of your PC’s
CD-ROM drive), and if necessary,click OK. Continue with step 7.
Installation for Windows
®
95/98 or Windows
®
NT 4.0 continued…
NOTE: For USB (Windows 98 only):
a) You will see an Add New Hardware dialog. Select NEXT.
b) Follow screen instructions to load USB driver. When asked for USB
driver source, point to Xerox CD. Continue with screen instructions.
c) Go to Step 5 to manually install the XK Series printer and TWAIN
drivers.
5
If AutoPlay is not enabled to automatically recognize the CD-ROM,
select Start>Run (Windows 95/98 and NT 4.0).
6
Type d:\Xinstall.exe (replace "d" with the letter designation of your PC’s
CD-ROM drive), and if necessary, click OK. Continue with step 7.
General Installation continued…
7
The WorkCentre software installation program will begin. Follow the on-
screen instructions for the rest of the installation.
8 R
estart your PC to complete the installation process.