Xerox VersaLink B600, User Manual

Page: 44 / 200

9. Power on the printer.
Connecting to a Wi-Fi Network at the Control Panel
To connect to a Wi-Fi network at the control panel:
1. At the printer control panel, press the H Hoom mee button.
2. Log in as administrator. For details, refer to the System Administrator Guide at www.xerox.com/support/
VLB600_VLB610docs .
3. Touch D Deevviiccee >> C Coonnnneeccttiivviittyy >> W Wii--FFii.
4. To enable the Wi-Fi feature, touch the enable toggle button.
5. To connect automatically to an existing Wi-Fi network:
a. In the list of available Wi-Fi networks, touch the required network.
If the required Wi-Fi network is not listed, or if the required network uses WPS, configure the connection
manually. For details, go to the next step.
b. If needed, to log in to the network, type the password.
c. To select a Wi-Fi frequency band, touch W Wii--FFii B Baanndd, then select an option.
By default, the Wi-Fi frequency band is set to AUTO.
d. Touch O OKK.
6. To connect manually to a Wi-Fi Network:
a. Touch M Maannuuaall SSeettuupp.
b. In the first field, type a name for the Wi-Fi network, then touch EEnntteerr.
c. Touch N Neettw woorrkk TTyyppee, then select an option.
d. Touch SSeeccuurriittyy, then select an option.
e. Touch W Wii--FFii PPrrootteecctteedd SSeettuupp ((W WPPSS)), then select an option.
Note: For a WPS setup with a Push Button Connection (PBC), select PPB BC C.
f. Touch O OKK.
44
Xerox
®
VersaLink
®
B600/B610 Printer User Guide
Getting Started