Xerox VersaLink B600, User Manual

Page: 170 / 200

SSYYM MPPTTO OM M SSO OLLU UTTIIO ON NSS
• Ensure that the humidity in the room is within
specifications. For more information, refer to
Relative Humidity .
• Choose a different paper type at the control panel,
in the application, and in the print driver.
• Replace the paper.
Ghosting appears in the printed output.
• Verify that the paper is the correct size, type, and
weight. Change the paper settings to match the
paper in the tray.
• Change the Paper Type settings in the print driver.
In the print driver Printing Options tab, select
PPaappeerr, then change the O
Otthheerr TTyyppeesetting.
• Replace the Drum Cartridge.
Auger marks appear on the printed output.
• To check the toner level, check the control panel,
use the print driver, or the Embedded Web Server. If
the toner cartridge is near empty, replace it.
• Verify that the toner cartridge is approved for use in
this printer, and replace it as needed. For best
results, use a genuine Xerox toner cartridge.
The output print is wrinkled or stained.
• Verify that the paper is the correct size, type, and
weight for the printer and that it is loaded properly.
• Load a new ream of paper.
• Change the Paper Type settings in the print driver.
In the print driver Printing Options tab, select
PPaappeerr, then change the O
Otthheerr TTyyppeesetting.
Envelopes are wrinkled or creased when printed. Check if the crease is within 30 mm (1.2 in.) of the
four edges of the envelope.
• If the crease is within the supported measurement,
it is printing as expected. Your printer is not faulty.
• If the crease is more than the supported
measurement, do the following steps:
170
Xerox
®
VersaLink
®
B600/B610 Printer User Guide
Troubleshooting