Installation and Setup
Assigning the IP Address Automatically
1.
At the printer control panel, press
Menu
.
Note:
To navigate through the menu, use the arrow buttons.
2.
Navigate to
Admin Menu
, then press
OK
.
3.
Navigate to
Network/Port
, then press
OK
.
4.
Navigate to
TCP/IP Settings
, then Press
OK
.
5.
Navigate to
Ethernet
, then press
OK
.
6.
Navigate to
Get IP Address
, then press
OK
.
7.
Navigate to
DHCP/AutoIP
, then press
OK
.
8.
Power off the printer, then power it on again.
9.
Two minutes after the printer restarts, verify that the printer has obtained a valid IP Address.
For
details, refer to
Finding the IP Address of Your Printer
on page 30.
Xerox
®
Phaser
®
6510 Color Printer
49
User Guide
Summary of Contents for Phaser 6510
