Xerox Phaser 6510 User Manual Download

Page: 30 / 236

Features

Administrative Features

The Embedded Web Server

The Embedded Web Server is the administration and configuration software that is installed in the

printer. It allows you to configure and administer the printer from a Web browser.

The Embedded Web Server requires:

•

A TCP/IP connection between the printer and the network in Windows, Macintosh, UNIX, or Linux

environments.

•

TCP/IP and HTTP enabled in the printer.

•

A network-connected computer with a Web browser that supports JavaScript.

Accessing the Embedded Web Server

At your computer, open a Web browser. In the address field, type the IP address of the printer, then press

Enter

Return

Finding the IP Address of Your Printer

To install the print driver for a network-connected printer, you need the IP address of your printer.

You

also need the IP address to access the settings of your printer through the Embedded Web Server.

You can view the IP address of your printer on the control panel or on the Configuration Report.

Note:

Wait until the printer has been on for 2 minutes to view the TCP/IP address. If the TCP/IP

address is 0.0.0.0 or begins with 169, this indicates a network connectivity issue. For details, refer

Printer Does Not Print

on page 125.

To view the IP address of the printer on the Configuration Report:
1.

At the printer control panel, press

Menu

Navigate to

Print Reports

, then press

Navigate to

Configuration

, then press

To print the report, at the prompt, press

To return the printer to Ready, press

Menu

The IP address information is located in the Communication Settings section of the Configuration

Report under IPv4 and IPv6.

To view the IP address of the printer on the control panel:
1.

At the control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Network/Port

, then press

Navigate to

TCP/IP Settings

, then Press

Navigate to

Ethernet

, then press

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands