Xerox Phaser 6510 User Manual Download

Page: 145 / 236

Troubleshooting

Symptom

Probable Causes

Solutions

Condensation inside the printer

causes partial blanks or creased

paper.

Power on the printer and leave it on for at

least one hour to get rid of the condensation.

For assistance, go to the Xerox

Support

website at

www.xerox.com/office/6510support.

Vertical blanks appear.

The LED lenses are blocked.

Clean the LED lenses. For details, refer to

Cleaning the LED Lenses

on page 106.

The printer is worn or damaged. For assistance, go to the Xerox

Support

website at

www.xerox.com/office/6510support.

The toner cartridges are not

Xerox

toner cartridges.

Ensure that the toner cartridges meet

specifications and replace if necessary.

White lines or streaks running

through only one color.

Something is blocking the lens

for the affected color.

Clean the lens for the affected color. For

details, refer to

Cleaning the LED Lenses

page 106.

White line or lines running

through all colors.

Paper or debris is dragging the

bottom of the transfer belt.

•

Remove the paper or debris from the

printer.

•

For assistance, go to the Xerox

Support

website at

www.xerox.com/office/6510support.

Slanted printing.

The paper guides in the trays

are not set correctly.

Reset the paper tray guides. For details, refer

Loading Paper

on page 63.

Xerox

Phaser

6510 Color Printer 145

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands