Xerox Phaser 6510 User Manual Download Page 73

Page: 73 / 236

Paper and Media

•

Load envelopes with the print side up, flaps closed and down, and going into the printer.

Note:

When you load envelopes with the flaps open, in the print driver, select

Portrait,

Landscape

Rotated Landscape

, as needed, to have them print correctly. In the print driver, use Rotate

Image 180 Degrees to flip the image, if needed.

If the control panel prompts you, verify the envelope size and type on the screen. If not, change the

paper settings.
a.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

To select the paper type, navigate to

Paper Type

, then press

Navigate to

Bypass Tray

, then press

Navigate to

Envelope

, then press

To return to the previous menu, press the

Left

arrow button.

To select paper size, navigate to

Paper Size Settings

, then press

Navigate to

Bypass Tray

, then press

To select an envelope size, press the arrow buttons, select the size, then press

To return the printer to Ready, press

Menu

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Xerox Phaser 6510, User Manual, Page: 73 / 236

Search results

Summary of Contents for Phaser 6510

Reviews: