Xerox Phaser 6510 User Manual Download

Page: 69 / 236

Paper and Media

Push the tray in all the way.

Notes:

•

If the tray does not go all the way in, ensure that the paper lift at the back of the tray is locked

down.

•

To avoid paper jams, do not remove the paper cover while printing is in progress.

•

If the tray is extended for Legal-size paper, the tray protrudes when it is inserted into the

printer.

If the control panel prompts you, verify the paper size and type on the screen. If you are not

prompted, change the paper settings.
a.

At the printer control panel, press

Menu

Note:

To navigate through the menu, use the arrow buttons.

Navigate to

Admin Menu

, then press

Navigate to

Printer Settings

, then press

To select the paper type, navigate to

Paper Type

, then press

Navigate to the desired tray, then press

To select the desired paper setting, press the arrow buttons, then press

To return to the Printer Settings menu, press the

Left

arrow button twice.

To select paper size, navigate to

Paper Size Settings

, then press

Navigate to the desired tray, then press

To select a paper-size setting, press the arrow buttons, select the setting, then press

To return the printer to Ready, press

Menu

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands