Xerox Phaser 6510 User Manual Download

Page: 107 / 236

Maintenance

To remove the waste cartridge, lower the top of the cartridge and lift it away from the printer. To

prevent toner spills, keep the openings facing up.

Notes:

•

Be careful not to spill toner when handling the waste cartridge.

•

After removing the waste cartridge, do not touch the area shown in the illustration.

Place the removed waste cartridge on a level surface, with the openings facing up.

CAUTION:

To avoid toner spills or malfunction, do not lay the waste cartridge on its side, or with the

openings facing down.

Xerox

Phaser

6510 Color Printer 107

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands