Xerox Phaser 6510 User Manual Download

Page: 38 / 236

Installation and Setup

Connecting to a Wireless Network

A wireless local area network (WLAN) provides the means to connect two or more devices in a LAN

without a physical connection. The printer can connect to a wireless LAN that includes a wireless router

or wireless access point. Before connecting the printer to a wireless network, the wireless router must be

configured with a service set identifier (SSID) and any necessary credentials.

Note:

Wireless networking is available only on printers with the optional Wireless Network Adapter

installed.

Installing the Wireless Network Adapter

The optional wireless network adapter plugs in to the back of the printer. After the adapter is installed,

and wireless networking is enabled and configured, the adapter is able to connect to a wireless network.

To install the Wireless Network Adapter:
1.

Power off the printer.

To remove the Wireless Network Adapter Port Cover, press down the latch, then pull the cover away

from the printer.

Xerox

Phaser

6510 Color Printer

User Guide

Summary of Contents for Phaser 6510













































































































































































































































Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands

Xerox Phaser 6510, User Manual

Search results

Summary of Contents for Phaser 6510

Reviews:

Related manuals for Phaser 6510

Brands by name

Popular brands