![background image](http://html1.mh-extra.com/html/xerox/phaser-4622/phaser-4622_system-administrator-manual_885554085.webp)
Security
Phaser 4622
System Administrator Guide
79
6.
Key User access to CentreWare Services can be restricted to particular workstations by entering
the IP addresses of the authorized workstations into the
Host Access List
field.
Note
Multiple IP address entries should be separated by a comma.
7.
The default Key User login name is
KeyUser
and the default password is
1234
. The Key User login
name and password can be changed by entering new values in the appropriate fields.
Note
The password cannot be left blank.
8.
Click
Apply
to save Login Name and password changes.
Disable Security Settings Reset
The Phaser 4622 can be configured to disable the resetting of security settings.
Note
The Security Settings Reset policy will be followed if the admin password is forgotten. If
Enabled, the security settings can be reset to the Factory Default using directions available from
Xerox Support. If Disabled, a chargeable service call would be required if security settings need to
be reset.
1.
At your Workstation, open the web browser, enter the
TCP/IP Address
of the machine in the
Address bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab.
4.
Click on the
Security
link.
5.
Click on the
Security Settings
link.
6.
Click the
Administrator Accounts
tab.
7.
Click the
Disable Security Settings Reset
radio button.
8.
Click
Apply
to save changes.
Configure Access Rights
Web UI and Local UI access rights can be configured for the Key User and for any un-authenticated
user.
Note
By default the Administrator account has all access rights enabled. This cannot be changed.
1.
At your Workstation, open the web browser, enter the
TCP/IP Address
of the machine in the
Address bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab.
4.
Click on the
Security
link.
5.
Click on the
Security Settings
link.
6.
Click the
Access Rights
tab.
7.
For the
KeyUser
and
AnyUser
check the Web UI and LUI access rights required.
8.
Click
Apply
to save changes.
Summary of Contents for Phaser 4622
