Xerox Phaser 4622 System Administrator Manual Download Page 81

Page: 81 / 155

Security

Phaser 4622

System Administrator Guide

Xerox Secure Access

Overview

Administrators can configure the device so that users must be authenticated before they can access
specific services or areas.

Xerox Secure Access provides a means of authenticating users via an authentication server and
optional card reader.

Xerox Secure Access and Accounting

Secure Access can be enabled with Network Accounting to provide accounting functionality.

Information Checklist

Ensure the Xerox device is fully functional on the network.

Note

TCP/IP and HTTP protocols must be configured so that Internet Services can be accessed.

Ensure the Xerox Secure Access authentication server is installed and configured with user
accounts.

Note

Refer to the documentation with the authentication server to complete this task.

Note

Contact your Xerox Sales Representative if you do not have the Xerox Secure Access Server.

If required, connect and configure your Secure Access Authentication device and card reader.

Note

Attach the card reader to the left-hand side of the device.

Note

Place the Secure Access Authentication device on the floor at the back of the device.

Ensure that SSL (Secure Sockets Layer) is configured on the Xerox device.

Note

For further instructions, see

Machine Digital Certificate Management & Trusted Certificate

Authorities

on page 91.

Summary of Contents for Phaser 4622




























































































































































Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands

Xerox Phaser 4622, System Administrator Manual

Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands