CentreWare Internet Services
Phaser 4622
System Administrator Guide
124
7.
Click the
Enabled
radio button to print a banner page before each printing job or click the
Disabled
radio button to print jobs without a banner page.
8.
Click
Apply
to save the changes.
General Print settings
The General Print Settings page contains the PCL settings, paper tray size and type settings,
configuration menu settings, and default job settings including 2-sided printing and collation.
To configure general print settings:
1.
At your Workstation, open your web browser and enter the
TCP/IP Address
of the machine in the
Address bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab. If required, enter the admin
username
admin
and
password
1111
and
click
OK
.
4.
Click on
the
Services
link.
5.
Click on
the
Printing
link.
6.
Click on the
General
Link.
7.
In the
PCL Menu
section, select the required font number and symbol set from the drop-down list.
8.
Enter the required
Font Pitch
and
Font Height
.
9.
Enter the required
Lines Per Form
.
10. Select the required
Line Termination
from the drop-down list.
11. Set
Wide A4
,
PCL Edge To Edge
and
Suppress Blank Pages
to
On
or
Off
using the drop-down lists
as required.
12. In the
Tray Menu
section set the tray defaults for each tray configured on your machine.
13. In the
Machine Settings
section enable the
Reprint Jammed Pages
,
Auto Tray Switching
and
Auto Tray Sequencing
settings as required. Set the
Load Paper Timeout
setting to
Off
or
between
1
and
1440
minutes using the drop-down list.
14. In the
Configuration Menu
section, select the
Configuration Menu Orientation
and
Personality
from the drop-down menus.
15. Enter the required
I/O Timeout
into the text field.
16. In the
Job Settings
section set the required 2-sided printing setting using the drop-down menu.
17. Enable paper substitution by checking the checkbox.
18. Enable
Postscript Edge To Edge
printing and
Collation
using the drop-down menus.
19. Click
Apply
to save the changes.
Enabling or disabling print spooling
1.
At your Workstation, open your web browser and enter the
TCP/IP Address
of the machine in the
Address bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab. If required, enter the admin
username
admin
and
password
1111
and
click
OK
.
4.
Click on
the
Services
link.
Summary of Contents for Phaser 4622
