Xerox Phaser 4622, System Administrator Manual

Page: 35 / 155

Network Installation
Phaser 4622
System Administrator Guide
29
c. Click on Remote Printer is on a BSD System .
d. Click on OK to complete the form.
9. Click on Yes at the Configure HP UX Printers Subpanel screen. This screen may be obscured by
the Add Remote Printer/Plotter form.
10. Click on File: Exit .
11. Click on File: Exit Sam .
12. Enter Exit to exit Super User mode .
13. Test the queue created, by entering the command:
Note lp -d queuename /etc/hosts .
14. Verify that the job prints at the machine.
tty Method
1. Enter su to access Super User mode .
2. Enter sh to run the Bourne shell .
3. Enter lpshut to stop the print service.
4. Create the print queue by typing (on the same command line):
Note lpadmin -pqueuename> -v/dev/null -mrmodel -ocmrcmodel -osmrsmodel -ob3 -orc -
ormhostname -orplp
Where queuename is the name of the queue being created and hostname is the machine
hostname.
5. Enter lpsched to start the print service.
6. Enter enable queuename to enable the queue to print to the machine.
7. Enter accept queuename to the queue accepting jobs from the HP-UX workstation.
8. Enter Exit to exit the Bourne shell.
9. Enter Exit to exit Super User mode .
10. Test the queue created, by entering the command:
Note lp -d queuename /etc/hosts .
11. Verify that the job prints at the machine.