Network Installation
Phaser 4622
System Administrator Guide
14
Network PING Test
Ping is a computer network administration utility used to test whether a particular host is reachable
across an Internet Protocol (IP) network and to measure the round-trip time for packets sent from the
local host to a destination computer, including the local host's own interfaces.
Procedure
1.
Press the
Menu
button on the machine and select
Tools
.
2.
Enter the Administrator’s
Password
. The default is
1111
and press the
OK
button
3.
Select
Setup
and press the
OK
button.
4.
Select
Network Settings
and press the
OK
button.
5.
Select
Network Ping Test
and press the
OK
button.
6.
Select either
IPv4 Address
,
IPv6 Address
or
Host Name
and press the
OK
button.
7.
Enter the Address to ping using the alphanumeric keypad and press the
OK
button.
8.
The screen displays pinging and will display, in milliseconds, the time taken for ping packets to be
returned.
Note
Press the OK button to cancel the Ping Test.
9.
If the
Packets Received
is greater than zero then network connectivity has been established.
10. On the display, scroll down to
Exit
and press the
OK
button.
Summary of Contents for Phaser 4622
