Xerox Phaser 4622 System Administrator Manual Download Page 62

Page: 62 / 155

Printer Drivers

Phaser 4622
System Administrator Guide

Configure any other print settings, such as

2-Sided Printing

, then click

OK.

Note

Any options selected in Printing Preferences will become the default settings for your driver.

Saved Settings

Ensure that you are on the

Paper/Output

tab.

Click on the

Saved Settings

menu.

To save your driver settings, click on the

Save

button and enter a name to describe the settings.

Click on

the

button.

The settings can be selected from the

Saved Settings

menu.

Layout/Watermark

The Layout/Watermark tab allows you to print your document as multiple images on a page or as a
booklet. You can also create and print watermarks on your documents.

Advanced

The Advanced tab contains settings specific to the driver, such as Postscript options and Font
selections.

Configure the advanced settings, as required.

Click on

the

button to close the driver.

Summary of Contents for Phaser 4622




























































































































































Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands

Xerox Phaser 4622, System Administrator Manual

Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands