Xerox Phaser 4622 System Administrator Manual Download Page 25

Page: 25 / 155

Network Installation

Phaser 4622

System Administrator Guide

DNSv6

11. Enter a valid

IPv6 Domain Name

12. Enter an IP address for the

Primary DNSv6 Server Address

. Enter an IP address for

Secondary

DNSv6 Server Address

13. Check the box to enable

Dynamic DNSv6 Registration

Note

If your DNS Server does not support dynamic updates there is no need to enable DDNS.

14. Scroll down the page and click on the

Apply

button to save the changes.

Test Access

At your Workstation, open the Web browser, In the

TCP/IP Address

bar, enter “http://” followed by

the Internet address of the machine. Then press the

Enter

key on the keyboard.

Note

If you use the domain name to specify the machine, use the following format.

http://myhost.example.com

Note

If you use the IP address to specify the machine, use one of the following formats

depending on your machine configuration. The IPv6 format is supported on Windows Vista or
later only. An IPv6 address needs to be enclosed in square brackets.

IPv4: http://xxx.xxx.xxx.xxx

IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]

Note

If you have changed the port number from the default port number “80”, append the

number to the Internet address as follows. In the following examples, the port number is 8080.

Domain name: http://myhost.example.com:8080

IPv4: http://xxx.xxx.xxx.xxx:8080

IPv6: http://[xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx:xxxx]:8080

Verify that the home page of CentreWare Internet Services is displayed.

The CentreWare Internet Services installation process is now completed.

Note

If the Accounting feature is enabled, you may be required to enter a user ID and passcode

(if one is set up).

Note

When your access to CentreWare Internet Services is encrypted, enter “https://” followed by

the Internet address, instead of “http://”.

•

Automatically Configured Gateway Address – Displays the automatically configured gateway
address.

Domain Name:

•

Domain Name – Displays the domain name.

DHCP/DDNS:

•

Release Registration – Allows DHCP resources to be released when the machine is powering
down. This is a display-only item and shows “Enabled”.

Summary of Contents for Phaser 4622




























































































































































Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands

Xerox Phaser 4622, System Administrator Manual

Search results

Summary of Contents for Phaser 4622

Reviews:

Related manuals for Phaser 4622

Brands by name

Popular brands