Software Upgrade
Phaser 4622
System Administrator Guide
132
Procedure
1.
At your Workstation, open the web browser, enter the
IP Address
of the machine in the Address
bar.
2.
Press
Enter
.
3.
Click on the
Properties
tab.
4.
Click on
Maintenance
link.
5.
Click on
Firmware Upgrade
link.
6.
Click on
Enabled.
7.
Click on
Firmware Upgrade
. If prompted, enter the Administrator’s
User ID
admin
and
Password
1111
, and click
Login
.
8.
In the
Firmware Upgrade
box, click on
Browse
to locate the software upgrade file
.hd
obtained
earlier.
9.
Click on the
.hd
file.
10. Click on
the
Open
button.
11. Click on
the
Install Software
button to proceed with the upgrade.
If prompted, enter the Administrator’s
User ID
admin
and
Password
1111
, and click
Login
.
12. The file will be sent to the printer and will disable the printing functionality. The web browser will
become inactive and you will not be able to access the machine via this method until the upgrade
has completed and the machine has rebooted. The upgrade should take no longer than 30
minutes.
13. Once the machine has completed the upgrade it will reboot automatically. The configuration
report will print (if enabled). Check the configuration report to verify that the software level has
changed.
Summary of Contents for Phaser 4622
