background image

Network Installation

Phaser 4622
System Administrator Guide

38

Wireless Networking

The Phaser 4622 can be fitted with an optional wireless network card to allow print jobs to be 
submitted via a wireless network.

Procedure

1.

Install the wireless network card 

- refer to the kit instructions.

2.

Configure Wireless LAN settings 

- select and save the features or settings.

Configure Wireless LAN settings

Before configuring wireless networking, ensure that the machine is located in an area where a strong 
wireless signal will be detected.

1.

Press the

 Menu

 button on the machine and select 

Tools

.

2.

Enter the Administrator’s 

Password

. The default is 

1111

 and press the 

OK 

button

3.

Select 

Setup 

and press the 

OK 

button.

4.

Select 

Network Settings 

and press the 

OK 

button.

5.

Select 

Wireless

 and press the 

OK 

button.

6.

Select 

Wireless Settings 

and press the 

OK 

button.

7.

Select 

Wizard 

and press the 

OK 

button. Wait while the machine detects any available wireless 

networks.

8.

Select the wireless network you wish to connect the machine to and press the 

OK

 button.

9.

Enter the WPA key and press the 

OK

 button or, if the network uses WEP encryption:

a.

Select the authentication key type to use and press the 

OK

 button.

b.

Enter the Open System or Shared WEP Key and press the 

OK

 button.

10. The machine should now connect successfully to the wireless network.

11. Press the 

Menu

 button to exit the Tools menu.

12. To test wireless connectivity, perform a network ping test. Ping the IP address of the router.

Connecting to a Wireless Network Using CentreWare Internet Services

Before you begin, ensure that you have the wireless network Service Set Identifier (SSID), encryption 
type, and passphrase. For details, see Collecting Wireless Network Information for connecting to a 
Wireless Network Manually on page 36.

Note 

To use CentreWare Internet Services to set up the printer on a wireless network, connect the 

printer to your computer through an Ethernet wired network.

Summary of Contents for Phaser 4622




























































































































































Reviews: