Xerox Phaser 3425, Service Manual

Page: 71 / 180

General Troubleshooting 4-3
Front Panel Troubleshooting
No Front Panel Display after Power is Turned ON
1. Verify that power cord is securely plugged into both the printer and the grounded,
three prong AC outlet with the appropriate power available.
2.
Ensure that all covers are securely closed.
3. Verify that Top Cover, Print Cartridge, and Fuser Gate interlocks are functional.
4. Replace the Power Supply Board.
5. Replace the Main Board.
6. Replace the Front Panel.
Front Panel LED is On, Front Panel Display is Blank
1.
Remove and reseat all connections to the Main Board.
2.
Remove and reseat the Front Panel connector.
3.
Replace the Front Panel wiring harness.
4.
Replace the Front Panel.
5.
Replace the Main Board.
Front Panel Continually Displays “Close Cover or Check
Cartridge”
1.
Verify that the Top Cover is securely closed.
2.
Ensure that the Print Cartridge is properly installed and securely seated.
3.
Verify that the Top Cover, Print Cartridge, and Fuser Gate interlocks are
functional.
4.
Replace the Main Board.
Front Panel Continually Displays “No Paper in Tray [x]”
1.
Ensure that the specified tray contains paper.
2.
Verify that the Paper Out actuator is in the correct position and moves without
binding.
3.
Replace the Paper Out Sensor.
4.
Replace the Main Board.