![background image](http://html.mh-extra.com/html/xerox/lf8140-8145/lf8140-8145_user-manual_884878033.webp)
Initial Operation · Initial Installation¦ 33
EN
2.
Switch the device on using the on/off switch on the rear.
Spaltenumbruch
Initial Installation
Initial Installation
After you connect your device to the mains voltage, the device starts. During the booting
process, the lights flash. Wait until the initial installation process begins.
Selecting the Language
1.
Use
[
to select the desired display language.
2.
Confirm with
OK
.
Selecting the Country
Setting the Country Correctly
Setting the Country
1.
Use
[
to select the country in which you are operating the device.
2.
Confirm with
OK
.
Set the Time Zone
Function is not supported in all countries and networks
(Function is not supported in all countries and networks)
Set the Time Zone
In countries with several time zones, you can select from preset time zones or manually enter
the deviance of your time zone from UTC (see also chapter on
setting the time zone
, page
83). In countries with one time zone, the setting is adjusted automatically if you set the coun-
try correctly.
1.
Use
[
to select the time zone in which you are operating the device.
2.
Confirm with
OK
.
Automatic Changeover Between Summer Time/Winter Time
CAUTION!
Setting the Country Correctly!
You must set the country in which you are operating the device. Otherwise your de-
vice is not adapted to the telephone network. If your country is not included in the
list, you must select a different setting and use the correct telephone cable for the
country. Consult your retailer.
Notice
Automatic Changeover Between Summer Time/Winter Time
With setting the country and time zone, the automatic changeover between sum-
mer and winter time is switched on. The automatic changeover is switched off if you
enter the deviance from UTC manually using the time zones editor
Summary of Contents for LF8140.8145
