Using the Menu System
Chapter 1: Configuring the Printer
❖
1-63
Table 1.20 USB Menu Functions
Menu Item and Function
Keystrokes
Display
Port Enable
Enable or disable the USB port.
The available values are:
On*
Off
For the new setting to take effect,
you must restart the printer
either by invoking the Print
menu’s
Restart Printer
item (see
page 1-103) or by powering the
printer off and on.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
USB Menu
2. Press
Item Up
or
Item Down
until you see:
USB Menu
Port Enable
3. Press
Value Up
or
Value Down
until you see:
Port Enable
=
New Value
4. Press
Enter
. You will see:
USB Menu
Port Enable
5. Press
Online
. You will see:
Ready
Port Timeout
Set the time for determining when to
end an incomplete print job and poll
the next port in the polling sequence.
The available values are:
5 - 300 seconds (
30*
)
This item also causes an implicit job
end such as Control D in PostScript or
<ESC> E in PCL, and invokes the
emulation functions associated with
this action (e.g., formfeed, reset, etc.).
The time changes incrementally by 1
second each time either
Value Up
or
Value Down
is pressed. Holding
down
Value Up
or
Value Down
causes continuous scrolling through
the values.
1. Press
Menu Up
or
Menu
Down
until you see:
Menus
USB Menu
2. Press
Item Up
or
Item Down
until you see:
USB Menu
Port Timeout
3. Press
Value Up
or
Value Down
until you see:
Port Timeout
=
New Value
4. Press
Enter
. You will see:
USB Menu
Port Timeout
5. Press
Online
. You will see:
Ready
Table 1.20 Page 1 of 2
