Xerox DocuPrint N2125, System Administrator Manual

Page: 124 / 246

Using the Menu System
1-108
❖
System Administrator Guide
Hex Mode
Set to print output as hexadecimal
codes instead of normal print data.
The available values are:
On
Off*
1. Press Menu Up or Menu
Down until you see:
Menus
Print Menu
2. Press Item Up or Item Down
until you see:
Print Menu
Hex Mode
3. Press Value Up or Value Down
until you see:
Hex Mode =
New Value
4. Press Enter . You will see:
Print Menu
Hex Mode
5. Press Online . You will see:
Ready
Restart Printer
Reboot the printer without powering
it off and powering it on again. The
available values are:
Yes
No*
You must select Yes and press
Enter for this function to take
effect.
1. Press Menu Up or Menu
Down until you see:
Menus
Print Menu
2. Press Item Up or Item Down
until you see:
Print Menu
Restart Printer
3. Press Value Up or Value Down
until you see:
Restart Printer=
New Value
4. Press
Enter
. When the action is
complete you will see:
Ready
Table 1.28 Print Menu Functions (continued)
Menu Item and Function Keystrokes Display
Table 1.28 Page 5 of 5