Configuring Automatic Tray Switching
Chapter 1: Configuring the Printer
❖
1-121
-
If no trays in the sequence are set to the correct
paper size and type, then the remaining trays are
searched. If there are no trays that can satisfy the
request, then the printer will prompt you to load
paper into the specified tray.
• If you include “MBF” in the Tray Sequence setting, a
request to feed paper from any other tray in the
sequence will be overridden and the printer will
attempt to feed paper from the multi bypass feeder
first. If the multi bypass feeder is out of paper, then the
other trays in the sequence are searched.
