Xerox DocuPrint 4050 NPS, Message Manual

Page: 76 / 248

PRINTER CONTROLLER MESSAGES
48-12 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
C076 Paper tray 4 fault -- Select
another tray. The tray 4 elevator has not reached the end of its travel in
9 seconds.
1. Open the HCF front door.
2. Open and close tray 4.
3. Close the HCF front door.
C077 Check paper supply in
tray 4. The stack height sensor does not see paper.
1. Clear the tray 4 feeder.
2. Load and close paper tray 4.
3. Press the Continue button.
C078 Tray 4 wait station sensor
not made, but SFRS
made. The paper failed to reach the wait station sensor in time, or
there was no paper at the wait station when attempting to
feed.
1. Clear the tray 4 feeder.
2. Press the Continue button.
C079 Sheet didn’t clear tray 4
wait station sensor. 1. Clear the tray 4 feeder.
2. Press the Continue button.
C080 Tray 4 feeder failed to
feed sheet from stack to
SFRS. The feeder failed to move a sheet from the stack to the
stack force relief sensor within the allotted time.
1. Clear the tray 4 feeder.
2. Fan the copy paper stack (tray4).
3. Load and close paper tray 4.
4. Press the Continue button.
C081 Tray 4 has low paper. The tray 4 elevator was raised with insufficient paper, or
the paper supply was nearly depleted during printing.
1. Clear the tray 4 feeder.
2. Load and close paper tray 4.
3. Press the Continue button.
C082 Tray 4 down due to
unlock button being
pressed. The tray 4 unlock button was pushed and the tray is down.
1. Open tray 4.
2. Load and close paper tray 4.
3. Press the Continue button.
C103 Paper tray 1 fault -- Select
tray 2. The tray 1 elevator has not reached the end of its travel in
9 seconds.
1. Open the right front door.
2. Open and close tray 1.
3. Close the right front door.
Message Explanation/action