Xerox DocuPrint 4050 NPS, Message Manual

Page: 28 / 248

PRINTER CONTROLLER MESSAGES
48-8 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
<INFO> Job Pool Manager: Job %d
purged from database Information about the indicated job has been purged from
the Job Pool Manager database and is no longer available
using the UI. This message displays after a Dump
Accounting Records command or when the system
automatically removes accounting records if it has been
installed with that option.
No action required.
<INFO> Job Pool Manager:
Partially submitted job (id %d)
removed from system An incomplete job was submitted to the system and has
been removed.
No action required.
<INFO> Lpd translator: DocuPrint
lpd protocol translator started The lpd protocol translator is up and running. Jobs may
now be submitted using the lpr.
No action required.
<INFO> Lpd translator: Shutting
down The lpr protocol translator has been manually shut down.
No action required.
<WARNING> AppleTalk: Framing
error on Begin/End <%s> There is an error in the Macintosh application that is
sending data to DocuPrint NPS. DocuPrint NPS continues
to function normally.
No action required.
<WARNING> AppleTalk: ProcSet
has no name There is an error in the Macintosh application that is
sending data to DocuPrint NPS. DocuPrint NPS continues
to function normally.
No action required.
<WARNING> AppleTalk: Too many
virtual printers - can’t add <printer
name> You have created a 65th virtual printer. You may create
more than 64, but the Chooser menu will display only 64.
<WARNING> AppleTalk: Too much
Document Structure Convention
Nesting There is an error in the Macintosh application that is
sending data to DocuPrint.
No action required if the job is printing normally.
If the job is not printing normally, correct the Macintosh
application error.
<WARNING> AppleTalk:
Unrecognized Patches line format
<%s> There is an error in the Macintosh application that is
sending data to DocuPrint.
No action required if the job is printing normally. If the job
is not printing normally, correct the Macintosh application
error.
<WARNING> IOT Model: Can’t
open logfile for read in
ParseLogFile There is a read failure.
Restart the system.
If the problem persists, reinstall the system.
<WARNING> IOT Model: nvma ->
problems! = No Problem after nvm
read of A meter The printer has been powered off, or a cable from the
workstation to the printer is either not connected or
connected improperly.
1. Check cable connections and power on the printer.
2. Contact your service representative for assistance.
Message Explanation/action