Xerox DocuPrint 4050 NPS, Message Manual

Page: 46 / 248

PRINTER CONTROLLER MESSAGES
48-26 XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE
F178 Stacker interlock open.
One bin stacker only
configuration. The stacker cover is open.
1. Discard the purged output.
2. Close the stacker cover.
3. Press the Continue button.
F179 Stitcher or Stacker Cover
opened in Print. The stitcher or stacker cover is open.
1. Remove the paper.
2. Open and close the covers.
F181 High Capacity Stitcher
Stacker output tray open. The output tray is open.
1. Unload the high-capacity bin.
2. Close the tray.
3. Press the Continue button.
F186 Stacker jam, late
departure at sensor. The paper failed to leave the stacker in time.
1. Clear the stacker; open and close the doors.
2. Discard the top tray delivery.
3. Press the Continue button.
F229 Finishing Device Full. The finishing device is full.
1. Empty finishing device.
2. Press the Continue button.
F231 Finishing Device Not
Ready. The finishing device is not ready.
1. Refer to the documentation that accompanies your
third-party finishing device and correct the problem.
2. Press the Continue button.
F233 Late Arrival to the Bypass
Transport Jam Sensor. The paper has arrived at the bypass transport jam sensor
later than the system software anticipated.
1. Empty finishing device.
2. Press the Continue button.
F234 Late Departure from the
Bypass Transport Jam
Sensor. The paper has departed from the bypass transport jam
sensor later than the system software anticipated.
1. Empty finishing device.
2. Press the Continue button.
F235 Bypass Transport cover
open. The top cover of the bypass transport is open.
1. Close the bypass transport’s top cover.
2. Press the Continue button.
F236 Bypass Transport cover
open in Print Mode. The top cover of the bypass transport is open while
printing.
1. Discard the purged output.
2. Close the bypass transport’s top cover.
3. Press the Continue button.
Message Explanation/action