Xerox DocuPrint 4050 NPS, Message Manual

Page: 29 / 248

PRINTER CONTROLLER MESSAGES
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE 48-9
<WARNING> IOT Model: PSIIOC
GET__IOT__CONFIGURATION
never returned valid info The printer has been powered off, or a cable from the
workstation to the printer is either not connected or
connected improperly.
1. Check cable connections and power on the printer.
2. Contact your service representative for assistance.
<WARNING> Job Pool Manager:
Acquire filter <id> removed from
system (prescanner died?) Indicates a software problem on your system. Restart the
system. If problem persists, contact your service
representative.
<WARNING> Job Pool Manager:
Can’t open VP file <file> - Unix error
<error number> Indicates file corruption on your system. Restart the
system. If problem persists, contact your service
representative.
<WARNING> Job Pool Manager:
FlexLM procedure <proc> failed
with reason <reason> Your software license has been installed incorrectly.
Contact your service representative with the text of this
message.
<WARNING> Job Pool Manager:
Missing attribute description for
attribute %d The job pool database was corrupted.
Restart the system.
<WARNING> Job Pool Manager:
VP file <file> has corrupt data Indicates file corruption or an installation problem on your
system. Try restarting the system. If problem persists,
contact your service representative.
<WARNING> Lpd translator:
Attempted read of data file timed
out A client is sending data to DocuPrint NPS using lpr, is low
on disk space, or is sending a very large file. The file being
sent is automatically removed from the system without
being printed.
Use lpr -s or free up some disk space on the client where
the lpr command is being used.
<WARNING> Lpd translator: Too
many media specifications to
process, excess ignored The -C lpr switch was used to request more kinds of media
than the maximum allowed.
Resubmit the job with fewer media specifications.
Message Explanation/action