Xerox DocuPrint 4050 NPS, Message Manual

Page: 33 / 248

PRINTER CONTROLLER MESSAGES
XEROX DOCUPRINT 4050/4090/4850/4890/92C NPS MESSAGES GUIDE 48-13
C104 Paper tray 2 fault -- Select
tray 1. The tray 2 elevator has not reached the end of its travel in
9 seconds.
1. Open the right front door.
2. Open and close tray 2.
3. Close the right front door.
C105 Check paper supply in
tray 1. The stack height sensor does not see the paper.
1. Clear the tray 1 feeder.
2. Load and close paper tray 1.
3. Press the Continue button.
C106 Tray 1 wait station sensor
not made, but SFRS
made. The paper failed to reach the tray 1 wait sensor in time, or
no paper was at the wait station when attempting to feed.
1. Clear the tray 1 feeder.
2. Press the Continue button.
C107 Sheet did not clear tray 1
wait station sensor. 1. Clear the tray 1 feeder.
2. Press the Continue button.
C108 Tray 1 feeder failed to
feed sheet from stack to
SFRS. The feeder failed to move a sheet from the stack to the
stack force relief sensor within the allotted time.
1. Clear the tray 1 feeder.
2. Fan the copy paper stack (tray1).
3. Load and close paper tray 1.
4. Press the Continue button.
C109 Tray 1 has low paper. The tray 1 elevator was raised with insufficient paper or,
the paper supply was nearly depleted during printing.
1. Clear the tray 1 feeder.
2. Load and close paper tray 1.
3. Press the Continue button.
C110 Check paper supply in
tray 2. The stack height sensor does not see the paper.
1. Clear the tray 2 feeder.
2. Load and close paper tray 2.
3. Press the Continue button.
C111 Tray 2 wait station sensor
not made, but SFRS
made. The paper failed to reach the wait station sensor in time, or
no paper was at the wait station when attempting to feed.
1. Clear the tray 2 feeder.
2. Press the Continue button.
Message Explanation/action