![background image](http://html1.mh-extra.com/html/xerox/docuprint-211/docuprint-211_user-manual_4035801179.webp)
165
Troubleshooting
7
7.2
For SMB Environment
7.2.1
When Setting Up the Printer
Condition
Verification
Solution
Cannot access the
printer from the
Windows client
due to forgotten
administrator
name and
password.
-
The factory settings of both the administrator
name and password are
admin
.
If you are using CentreWare Internet
Services‚ reset the administrator name and
password.
If the connection still cannot be made,
navigate to
5:Network
at the control panel,
and choose
YES
for
Ready to Init
. However,
in this case, all network settings will be
returned to factory settings. Before you
proceed to choose
YES
for
Ready to Init
, it is
recommended that you print out the Printer
Settings to check the present settings first.
Cannot overwrite
the config.txt file.
Is there an error message
written in the config.txt file?
If the config.txt file is changed and saved, a
message.txt file will be created in the
admintool folder. If an error message is
written in this file, changes will not be
effective. Check the setting contents of the
config.txt file and resave.
Did you try to overwrite the
file at the printer after using
and editing the copied
config.txt file on the client?
Delete the config.txt file inside the admintool
folder at the printer, and then copy it.
-
Switch off the printer, and then switch it on
again.
Summary of Contents for DocuPrint 211
