Xerox DocuPrint 211 User Manual Download Page 101

Page: 101 / 206

3.4 Configuring the Client

Conf

iguri

ng in SMB E

vironment

When the printer driver has been installed, click

Finish

Exit

at each

of the dialog box to close the Fuji Xerox Setup Menu.

Take out the CD-ROM from the CD-ROM drive.

Testing Printing

To check the connection, print the test page.
The procedure is as follows:

Procedure

Click the Start menu, and select

Settings

and then

Printers

The Printers windows is displayed.

The DocuPrint 181/211 printer icon has been added by the installation
of the printer driver. Double-click this added printer icon and click

Properties

from the Printer menu.

The printer properties dialog box is displayed.

Click

Print Test Page

on the General tab.

A dialog box to confirm whether or not the test page is printed correctly will be
displayed.

Check the print results, and if the test page is printed correctly, click

Yes

Click

on the printer properties dialog box.

Summary of Contents for DocuPrint 211















































































































































































































Search results

Summary of Contents for DocuPrint 211

Reviews:

Related manuals for DocuPrint 211

Brands by name

Popular brands

Xerox DocuPrint 211, User Manual

Search results

Summary of Contents for DocuPrint 211

Reviews:

Related manuals for DocuPrint 211

Brands by name

Popular brands