Xerox DocuPrint 211 User Manual Download Page 58

Page: 58 / 206

2.4 Configuring Windows NT 4.0/Windows 2000/Windows XP

Configuring

in T

/IP Envi

ronment

Take out the CD-ROM from the CD-ROM drive.

Setting Port 9100 and Testing Printing

Set Port 9100 and print a test page to check the connection. The procedure is as
follows.

Procedure

Click the Start menu, select

Settings

and followed by

Printers

The Printers window is displayed.

The DocuPrint 181/211 printer icon has been added by the installation
of the printer driver. Double-click this added printer icon and from the
Printer menu, select

Properties

The printer properties dialog box is displayed.

Click the

Ports

tab.

Select this model, and click

Configure Port

Summary of Contents for DocuPrint 211















































































































































































































Search results

Summary of Contents for DocuPrint 211

Reviews:

Related manuals for DocuPrint 211

Brands by name

Popular brands

Xerox DocuPrint 211, User Manual

Search results

Summary of Contents for DocuPrint 211

Reviews:

Related manuals for DocuPrint 211

Brands by name

Popular brands